Technical parameters
Characteristics	Values	Units
Appearance	White emulsion
Solid Content	≥55	%
PH	6-8
Viscosity	15000-30000	mPa·s

Product Packaging:
50kg Plastic Drum, 1000kg IBC Drum.

Usage Methods:
Before gluing, be sure to remove the surface of the board to be glued to dust, and oil, and control the moisture content of the board.
1: double-sided gluing: depending on the surface flatness of the substrate, the better the surface density, the flatter, the more savings on the glue, otherwise should be on more, generally not less than 100g / ㎡ on both sides of the glue each
2: Single-side gluing: the amount of glue in the 200-300g / ㎡ between
3: Pressing: make sure the glue surface is dry before pressing, and the pressure is not less than 6kg/cm², pressing to ensure that there is a glue line between the two materials to adhere to the glue line or pudding extrusion, otherwise it is easy for the glue surface drying lead to bonding failure
4: The use of ambient temperature requirements: 0 ℃ or more use, the lower the temperature, the longer the press time, the higher the temperature, the shorter the opening time.

Precautions:
(1) Please try to use and store the adhesive within the ambient temperature of 5-35℃.
(2) Shelf life: 6 months at room temperature, after half a year, if there is no delamination or lumping, it can still be used.

This information is based on our current knowledge and experience. Since the use of different materials and changing working conditions are beyond our control, we strongly recommend that customers conduct thorough experiments and consult our technical staff. We do not accept any liability related to this information. The company reserves the right to modify the above content as necessary.

Usage Methods:
Before gluing, be sure to remove the surface of the board to be glued to dust, and oil, and control the moisture content of the board.
1: double-sided gluing: depending on the surface flatness of the substrate, the better the surface density, the flatter, the more savings on the glue, otherwise should be on more, generally not less than 100g / ㎡ on both sides of the glue each
2: Single-side gluing: the amount of glue in the 200-300g / ㎡ between
3: Pressing: make sure the glue surface is dry before pressing, and the pressure is not less than 6kg/cm², pressing to ensure that there is a glue line between the two materials to adhere to the glue line or pudding extrusion, otherwise it is easy for the glue surface drying lead to bonding failure
4: The use of ambient temperature requirements: 0 ℃ or more use, the lower the temperature, the longer the press time, the higher the temperature, the shorter the opening time.

Precautions:
(1) Please try to use and store the adhesive within the ambient temperature of 5-35℃.
(2) Shelf life: 6 months at room temperature, after half a year, if there is no delamination or lumping, it can still be used.

This information is based on our current knowledge and experience. Since the use of different materials and changing working conditions are beyond our control, we strongly recommend that customers conduct thorough experiments and consult our technical staff. We do not accept any liability related to this information. The company reserves the right to modify the above content as necessary.

Web Menu

Product Search

Language

Exit Menu

LM158 Door Panel Tenon Joint Adhesive

Web Menu

Product Search

Language

Share

Exit Menu

LM158 Door Panel Tenon Joint Adhesive